Printing the Warpinator5000
- GR
- Sep 15, 2018
- 1 min read
Following Maker's Muse review of another bed adhesion solution, we thought of putting DustNPrint to the same ABS test.
This is our first try, will it stick?!
top of page
Search
![Dual Heater Volcano HotEnd [DNP]](https://static.wixstatic.com/media/a92653_e87178218bb84cfbb03f896a7b99d38b~mv2_d_4032_3024_s_4_2.jpg/v1/fill/w_980,h_735,al_c,q_85,usm_0.66_1.00_0.01,enc_avif,quality_auto/a92653_e87178218bb84cfbb03f896a7b99d38b~mv2_d_4032_3024_s_4_2.jpg)
bottom of page
Following Maker's Muse review of another bed adhesion solution, we thought of putting DustNPrint to the same ABS test.
This is our first try, will it stick?!
Yorumlar