DustNPrint | Getting Started

How to mix it, brush it and be ready to print it.

Free official DnP spoon for easier setup :

https://www.thingiverse.com/thing:3095854#

- Mix 3 DnP spoons of DnP with 3-4 spoons of water.

- Mix thoroughly until there is no more dust.

- [Optional] Wait for bubbles to clear out

- Brush the DnP Mix to the bed [pre-heated or not]

- Set the printing bed temperature so that the bed is at 100C.

[ For our Prusa Mk3, bed temperature must be set at 120 so that the bed is at 100C ]